2
USBCloner The Burn tool Quick Guide
USBCloner The Burn tool Quick Guide
Copyright® 2005-2015 Ingenic Semiconductor Co., Ltd. All rights reserved.
2
Install the driver
USBCloner has Linux and Windows version. on Linux, USBCloner do not need to install the driver.
Therefore, this section was for Windows XP, for example, this paper introduces Windows host driver
installation steps. USBCloner driver need’t Microsoft signature certification.
Note: when you install the drive under Windows, be sure to follow the documentation instructions
to install it. When you install the drive under Windows 8, you first need to configure the system to
disable the driver mandatory signature". Specific steps can be found on the Internet
Press the boot key and press the reset key to push the board into the burning mode. When the
board is connected to the PC, it automatically searches for drive installation and indicates
that the drive installation failed
。
Right click on “my computer” to "manage",and you can find devices that have not
successfully installed USB drivers under other devices in the device manager
，
As shown in
figure
2-1
。
