16
USBCloner The Burn tool Quick Guide
USBCloner The Burn tool Quick Guide
Copyright® 2005-2015 Ingenic Semiconductor Co., Ltd. All rights reserved.
Figure 5-4 Save the configuration information
4.4 Burn
After the configuration is saved, the burning tool will return to the main interface, such as figure 3-1 and
began to burn.
1. Click on
"start"
and enter the burning status.
2. Press the development board of USB burn mode button.Make development board also can burn
into the burning state.
In the process of burning all the progress bar reaches 100% buffer and complete as shown in figure
5-5.
