INGENIA Nix series, Product Manual

Page: 48 / 124

Nix Product Manual | Connectors Guide
INGENIA | 01/22/2019 48
CAN
2-way pin
receptacle
8.5 mm height
2.5 mm width
Gold flash
Sullins PPPC021LFBN-
RC Digi-Key
S7035-ND
2
RS485
4-way pin
receptacle
8.5 mm height
2.5 mm width
Gold flash
Sullins PPPC041LFBN-
RC
Digi-Key
S7037-ND
2
Connector Description Part number Image Distributor
code Quanti
ty
5.3 Nix with Quick Connectors Board (NIX-x/xx-y-Q)
The Nix Servo Drive with pin headers can be ordered with the Quick Connector Board:
• Easy connection with motor, feedbacks, I/O and communications, without need of mating connectors.
• No extra crimping tools are needed to start using the Nix Servo Drive (only a screwdriver to plug the
cables).
• The Quick Connector Board has spring type connectors from Phoenix and Weidmuller for easy and fast
prototyping and testing .
• Supply and motor cables can be connected or directly soldered .
• Simple user interface with clear labeling .
• See Dimensions to check the total size of the assembly.
Wire gauges
Recommended conductor cross section:
• Power and motor cables: 0.5 mm
2
~ 1.5 mm
2
(20 ~ 16 AWG).
• Signal wires: 0.2 mm
2
~ 0.5 mm
2
(26 ~ 20 AWG).

Open-source design
The Quick Connector Board is an open-source design and can be used as reference.
The 3DPDF , the STEP model and the PCB outputs of the Quick connector board are available for download
