background image

Push  both  of  the  Angle  Control 

Switches outward.

For Booster & Junior Car Seat (Ages 4 and over)

※ Caution

If  your  vehicle’s  seat  is  lower  than 

others, assemble the Installing 

Plate  to  low  position  of  the  Height 
Control Bar.

Place the kid on the car seat and lift 

the  Lever  of  Foot  Plate.  Adjust 

height of the Foot Plate to match 
the feet of the kid and then pull 
down the Lever.

After  release  the  Switches  at 

desired angle, gently shake the 
Foot Plate up and down so that 
the Switches return to its original 
posit ion.

The sole is inclined by about 40 
degrees, so it is more comfortable 
for infants to adjust angle of the 
Foot Plate to 40 degrees.

For Infant & Convertible Car Seat (Ages 3 and under)

Height Adjustment Method

Angle Adjustment Method

7

Lift  the  Lever  of  Load  Leg.  Adjust 

the height of Load Leg to reach 
the floor of the vehicle and then 
pull down the Lever

40˚

Place the kid on the car seat and lift 
the Lever of Installing Plate.

Lift  the  Lever  of  Load  Leg.  Adjust  

the height of Load Leg to reach 
the floor of the vehicle and then 
pull down the Lever

Adjust height of the Foot Plate 

to 

match the feet of the kid and then pull 
down the Lever.

Summary of Contents for KneeGuardKids 3 INNO SENSE









Reviews: