INGAL Ezy-Guard 4, Product Manual

Page: 19 / 34

Roadside Safety Barrier
19
Release 07/22b
Ezy-Guard 4 Installation Checklist
Ezy-Guard 4 Installation Checklist
Customer:
Project:
Barrier ID:
Barrier Length:
Checked By:
Signed:
Date
Have the Z-posts been positioned every 2m
Yes No
Have the Z-posts been correctly orientated in relation to the direction of traffic
Yes No
Carriages are positioned on the posts between the retaining lugs and the resistance tabs
Yes No
Posts are installed to the correct height (777mm) and within the tolerances of section 7.14
Yes No
Have the Ezy-Carriages been correctly orientated
Yes No
Have the rails been attached to the Ezy-Carriages using the post bolts with the socket recess
Yes No
Have the rails been spliced observing the correct lap
Yes No
Have the rails been spliced with M16x32mm mushroom head bolts
Yes No
Are all splice bolts and post bolts snug tight
Yes No
Is Ezy-Guard 4 appropriately delineated
Yes No
Is Ezy-Guard 4 suitably anchored with approved terminals
Yes No
Are the cables in the terminals tensioned to their nominated torque
Yes No
Has any minor damage been repaired using two coats of an organic zinc rich paint
Yes No
Is the barrier system free from humps, sags or other irregularities
Yes No
Has the ground or pavement around the post been left dense, tight and smooth
Yes No
Are the barrier components free from splits, burrs or sharp edges after installation
Yes No
Has the top of the post been cut or otherwise altered?
Yes No
Disclaimer:
Important Note: The conformity of the installation is the responsibility of the installation contractor, and Ingal Civil Products accepts no liability for or
in connection with any installation that is outside of the specifications of this manual or the Road Controlling Authority. For more information, please
refer to our Standard Terms and Conditions of Sale available on our website: www.ingalcivil.com.au.