ING SPEEDBIRD 163E, User Manual

Page: 13 / 30

Motor A
Align holes in the bottom Align holes in the bottom
Assemble/disassemble the propellers
Match corresponding propellers ( A with A and B with B), then turn screws clockwise to tighten them.
(as pic 1-2).
Turn screwdriver counterclockwise to remove the 2 screws and propellers. (as pic.3-4).
I63E User Guide
A
-11-
Prevent explosions by not squeezing or short-circuiting the battery.
Do not remove the power cord from drone to prevent battery from short-circuiting. Do not
disassemble battery or place near high temperatures or heated areas such as fires or electric
heating devices.
Check the power cord, shell and other parts regularly. If any damage occurs, repair damage
before using.
Charger is meant for indoor use only.
After each flight, the battery should be charged halfway and then stored until used again. For
long term non-usage, it is recommended to use the battery complete and charge it once a
month to prevent damage from overcharging.
Drone will not fly if propellers are installed incorrectly.
Handle propeller blades carefully to prevent scratches.
To ensure optimal safety and performance, only use the official ING propeller blades.