6
ENGLISH
Technical date table
General dimensions (mm)
Models
Long Wide High
Maximum
Power
(Kw)
Phases
Maximum
Engineering
(A)
Main
Supply
(V)
Weight
(Kg)
PE-60NS 600 438 223-233
4
II
16,6
240
32
PE-80NS 800 438 223-233 5,3
II
22
240
46
PE-60NC 600 438 223-233
4
II
16,6
240
47
PE-80NC 800 438 223-233 5,3
II
22
240
66
The register number of the plate is on the back part (see the draw of electric connexion)
keeping all the necessary details to do the electrical engineering.
Placing
To place the machine does attention it will be well level, correcting any unevenness with the
adjustable feet (to screwing or unscrewing). The general electrical engineering switch will be
placed near to the machine and wit easy access.
We advise to install the machine under the extractor Hood with the finality to absorb quickly
the vapour.
In the case the machine will be placed near the walls, party wall, cooking furniture, ornamental
coating, etc. We advise that it will be in inflammable material. It must be sure that the fire-
fighting regulations will be respected.
Guidelines
The installation must be done with the following guidelines:
· Anti-incident Prescription in force.
· Installation prescription, CEI rules.
Installation
The installation, start and maintenance of the machine will be made by authorised personnel.
All related with the installation will respect the guidelines in force.
The manufacturer will not be held responsible of bad working of the appliance due a wrong
installation or a faulty installation.
Important:
Following the international arrangements, during the connexion to the appliance it
is required a mechanism who allow disconnect the mains all the poles. This mechanism will
have an overture in the contacts of minimum 3 mm.
Electric connexion
The general installation of the appliance, whose outlet is located in the back right, should make
it always by an
authorized servicer
.
In accordance with the Directive 73/237EEC for the low-voltage, Directive EMC 89/336 EEC
and subsequent modifications with the Directive 93/68 for CE mark.
Check the mains voltage. It must correspond to which indicates the rating plate carrying the
appliance. It is essential to have a good earth connection.
Electrical Diagram for each knob:
