background image

   

 
 

 
 

BLOW4/BLOW4D User’s Manual

 

 

15

 

6. END USERS WARRANTY 

 

Trademarks 
 

INFRASONIC, BLOW4 and BLOW4D are registered trademarks of SIMS Corp. 

 
End User Warranty

 

SIMS Corp. warrants this product, under normal use, to be free of defects in materials and workmanship for a 
period  of  One  (1)  year  from  date  of  purchase,  so  long  as: the product is owned by the original purchaser, with 
proof of purchase from an authorized SIMS Corp. dealer. This warranty explicitly excludes power supplies and 
included cables, which may become defective as a result of normal wear and tear. 
 
In the event that SIMS Corp. receives, from an original purchaser, and within the warranty coverage period. 
Written notice of defects in materials or workmanship, SIMS Corp. will either replace the product, repair the 
product, or refund the purchase at its option. To obtain warranty service, the original purchaser or the authorized 
dealer must fill the support contact form at www.Infra-sonic.com. In the event repair is required, shipment to and 
from SIMS Corp. and possible handling charges shall be borne by the purchaser. SIMS Corp. will not accept returns 
without prepaid shipments. In the event that repair is required, a Return Authorization Number must be obtained 
from SIMS Corp. After this number is obtained, the unit should be shipped back to SIMS Corp. in a protective 
package with a description of the problem and the Return Authorization Number clearly written on the package. All 
such returns must be shipped to SIMS Corp. headquarters in Seoul, Korea. 
 
In the event that SIMS Corp. determines that the product requires repair because of user misuse or regular wear, 
it will assess a fair repair or replacement fee. The customer will have the option to pay this fee and have the unit 
repaired and returned, or not pay this fee and have the unit returned and un-repaired.     
 
A breach of this warranty shall not include any other damages. SIMS Corp. will not be liable for consequential, 
special, indirect, or similar damages or claims including loss of profit or any other commercial damage, even if its 
agents have been advised of the possibility of such damages, and in no event will SIMS Corp.’ accept liability for 
any damages to the purchaser or any other personal claims exceeding the price paid for the product, regardless of 
any claim. SIMS Corp. specifically disclaims all other warranties, expressed or implied. 
 

The FCC and CE Regulation Warning 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.   

Caution

: Any changes or modifications in construction of this device, which are not expressly approved by the 

party responsible for compliance, will void the user's warranty.   

NOTE

: This equipment has been tested and found to comply with the limits of a Class ‘A’ digital device, pursuant 

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and 
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may 
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to 
cause harmful interference. In that case the user will be required to correct the interference at their own expense. 
If necessary, consult an experienced radio/television technician for additional suggestions. 
 

 

 
 
Correspondence 

For technical support inquiries, contact the nearest dealer, local SIMS Corp. distributor or SIMS Corp. directly at: 

 

SIMS Corp. 

 

424 

Cheongcheon-Dong, Bupyong-Gu, Incheon, Korea 

 

www.infra-sonic.com

 

 

www.simsaudio.com

 

 
 

Summary of Contents for BLOW4

















Reviews: