background image

18 

IM111221 

RD: DEC 2011 

RL: 1B 

BA 

InfraSave IEP-6024 Manual 

The Manufacturer warrants to the original consumer that this product is free from defects in material and/or 
workmanship under normal use and service for a period of one year (12 months) from the date of pur-
chase, and subject to the conditions and limitations stated herein. 

Warning: 

Use of this heater in coastal 

salt-air regions can result in corrosion of the aluminum body and reflector, and premature failure of the 
quartz lamp. Corrosion and failure resulting from use in coastal areas represents normal use in that envi-
ronment and is not covered by warranty.

 

ONE YEAR (12 Month) WARRANTY

 

Subject to the conditions and limitations stated herein and defined below, during the term of this limited 
warranty, we will supply any component part of the heater, excluding any labor , which the Manufacturer’s 
examination determines to be defective in workmanship or material for a period of one year (12 months) 
from the date of purchase. This warranty applies to the heater’s original owner, and only if the unit is in-
stalled and operated in accordance with the printed instructions accompanying the unit and in compliance 
with all applicable installation, building codes and good trade practices. Failure to maintain the equipment 
through regular maintenance or service by a qualified service technician shall void the warranty.  

 

WHAT IS NOT COVERED 

The Manufacturer shall not be responsible for any expenses, including service, labor, diagnosis, analysis, 
material or transportation/shipping charges incurred during removal, repair, or reinstallation of this product, 
or any of its components or parts.  All labor, shipping, and/or service charges shall be paid by the owner.  
This warranty does not cover products that have been modified after leaving the factory, improperly in-
stalled, misused, exposed to abuse or damaged by acts of God, negligence, accident, corrosive or con-
taminated atmosphere, submersion in water, excessive thermal shock, impact, abrasion, normal wear due 
to use, alteration or operation contrary to the owner’s manual or if the serial number has been altered, de-
faced or removed.  This warranty shall not apply if the voltage to the heater exceeds the rated voltage on 
the rating plate by more than 10%.  The Manufacturer shall not be liable for consequential damages arising 
out of, or in connection with, the use or performance of the product, or other indirect damages with respect 
to loss of property, revenues, or profit, or costs of removal, installation or reinstallation, or for any default or 
delay in performance by its warranty caused by any contingency beyond its control, including war, govern-
ment restrictions, or restraints, strikes, fire, flood, acts of God, or short or reduced supply of raw materials 
or products.

 

WARRANTY PROCEDURE

 

To establish the date of purchase for any purpose under this Limited Warranty, you must retain the original 
receipt that can establish the purchase date of your unit. If you do not provide such documents, the start 
date of the term of this Limited Warranty will be based upon  the date of unit manufacture, plus thirty (30) 
days. Do not ship a heater back to InfraSave for repair. Contact your local supplier / installer of the heater, 
or a local qualified electrician for warranty service or repair.  

 

LIMITATIONS AND EXCLUSIONS 

This document contains all warranties made by the Manufacturer and may not be varied, altered or ex-
tended by any person.  There are no promises, or agreements extending from the Manufacture other than 
the statements contained herein.  THIS WARRANTY IS IN LIEU OF ALL WARRANTIES EXPRESSED OR 
IMPLIED, TO THE EXTENT AUTHORIZED BY THE LAWS OF THE  JURISDICTION, INCLUDING SPE-
CIFICALLY THE WARRANTIES OR MERCHANTIBILITY OF FITNESS FOR A PARTICULAR PURPOSE. 
All warranties are limited in duration to 12 months. 
It is understood and agreed that the Manufacturer’s obligation hereunder is limited to repairing or replacing 
parts determined to be defective as stated above. In no event shall the Manufacturer be responsible for 
any alleged personal injuries or other special, incidental or consequential damages. As to property dam-
ages, contract, tort or other claim the Manufacturer’s responsibility shall not exceed the purchase priced 
paid for the product. 
All replacement parts will be warranted  for the unused portion of the warranty coverage period remaining 
on the applicable unit. 
Some States and authorities do not allow certain warranty exclusions or limitations on how long a warranty 
lasts or the exclusions or limitations of incidental or consequential damages.  In such cases, the above 
limitations or exclusions may not apply to you and are not intended to do so where prohibited by law.  This 
warranty gives you specific legal rights.  You may also have other rights which vary by each jurisdiction. 

InfraSave IEP SERIES HEATERS - LIMITED WARRANTY CERTIFICATE 

Summary of Contents for IEP 6024



















Reviews: