12
Tools
,
Equipment
,
and
Supplies
The procedure for calibration and field service of the gas analyzer require the following tools, test
equipment, and expendable supplies:
T O O L S
Screwdrivers, standard (medium and small); and Phillips (medium and small).
Adjustable wrench.
Low-power soldering iron.
E L E C T R O N I C T E S T E Q U I P M E N T
Oscilloscope, Tektronix Model 912B or equivalent.
Digital Voltmeter, Fluke Model 8000A or equivalent.
Z E R O A N D C A L I B R A T I O N G A S E S
Nitrogen in a pressurized cylinder (zero gas).
Calibration gas, near full-scale concentration, with a nitrogen balance, in a pressurized,
certified cylinder.
G A S H A N D L I N G E Q U I P M E N T
Pressure regulators for zero and span gas cylinders.
Teflon TM* gas tubing or equivalent, 1/4 inch OD, 10 feet.
An IR-1151 sampling conditioner or equivalent.
*
Teflon TM is a trademark of E. I. DuPont
Summary of Contents for IR-8400D
