www.austin-hughes.com
UM-PPS-03-S-Q320V1
P.1
** Data refresh speed subject to number of cascaded PDU.
< 1.1 > IP Dongle Speci
fi
cation
InfraPower PPS-03-S
Features
Capacity
IP Dongle Group ( Just 1 for 32 PDU levels )
1
Max PDU number per IP dongle ( IPD-03-S )**
32
Concurrent Users
1
Enhanced
Features
Outlet Level kWh & Amp Measurement
Outlet Scheduling
Energy Consumption ( kWh ) Monitoring
Apparent Power ( kVA ) Monitoring
Power Factor Measurement
Circuit Breaker ( MCB ) Monitoring
Remote level & ID setting for cascaded iPDU
Basic
Features
Aggregate Current ( Amp ) Monitoring
Individual Outlet Switch ON/OFF
Temp-Humid Monitoring
Alarm Threshold Setting
Rising Alert Threshold Setting
Door & Smoke Sensor Monitoring
Remote Access via Web
Graphic User Interface
PDU
Series
Support
All Single & Three Phase iPDU
All Single & Three Phase Dual Feed iPDU
All Single & Three Phase inline meter
All Single & Three Phase Dual Feed inline meter
IP Dongle Access to 32 PDU Levels
Patented IP Dongle provides IP remote access to the PDUs by a true
network IP address chain. Only 1 x IP dongle allows access to max. 32
PDUs in daisy chain - which is a highly e
ffi
cient application for saving not
only the IP remote accessories cost, but also the true IP addresses required
on the PDU management.
Hot-Pluggable design facilitates the IP dongle installation. Simply integrate
the IP Dongle to the 1st PDU, then the entire daisy chain group can be
remote over IP. Hence, administrator can remotely access all PDUs in the
daisy chain group by one single IP via the IP Dongle.
Part no.
IPD-03-S
