3
SMT-BD2
SMT-BD2
WARNING !
This is a manual describing a series of servo amplifiers having output capability suitable for driving AC brushless
servo motors equipped with an encoder only or an encoder plus Hall effect sensors for the position feedback. This
manual may be used in conjunction with appropriate and referenced drawings pertaining to the various specific
models
.
Maintenance procedures should be attempted only by highly skilled technicians (EN 60 204.1 standard)
using proper test equipment
.
The conformity with the standards and the "CE" approval are only valid if the items are installed according to the
recommendations of the racks and amplifiers manuals.
Any contact with electrical parts, even after power down, may involve physical damage.
Wait for at least 5 minutes after power down before handling the amplifiers (a residual voltage of several hundreds
of Volts may remain during a few minutes).
INFRANOR drives are conceived to be best protected against electrostatic discharges. However, some
components are particularly sensitive and may be damaged. Before handling the drives and, particularly, before
any contact with the connectors, the user himself must be earthed. Place or store the drives on conducting or
electrostatically neutral areas but not on plastic areas, carpeting or insulation material that may be electrostatically
loaded.
INFRANOR does not assume any responsibility for any physical or material damage due to improper handling or
wrong descriptions of the ordered items.
Infranor reserves the right to change any information contained in this manual without notice.
Any intervention on the items, which is not specified in the manual, will immediately cancel the warranty.
This manual is a translation of the original document and does not commit INFRANOR's responsibility.
The french manual is the only reference document.
© INFRANOR,
February 2005
. All rights reserved.
Issue:
3.0
!
