1
This manual describes the
option "c"
of the
SMT-BD1
amplifier:
Positioning in stepping motor
emulation
. The general information about the digital amplifier commissioning are described in
the standard
SMT-BD1
manual. This manual may be used in conjunction with appropriate and
referenced drawings pertaining to the various specific models.
Maintenance procedures should be attempted only by highly skilled technicians (EN 60
204.1 standard) using proper test equipment
.
The conformity with the standards and the "CE" approval are only valid if the items are installed
according to the recommendations of the racks and amplifiers manuals.
Any contact with electrical parts, even after power down, may involve physical damage.
Wait for 30 seconds after power down before handling the rack or the amplifiers (residual
voltage).
INFRANOR does not assume any responsibility for any physical or material damage due to
improper handling or wrong descriptions of the ordered items.
Infranor reserves the right to change any information contained in this manual without notice.
This manual is a translation of the original document and does not commit INFRANOR's responsibility. The
french manual is the only reference document.
© INFRANOR, April 1998. All rights reserved
Updating index: 2.01
