Infra4Health SHC, Manual

Page: 8 / 24

6
< 5 > INSTALL FRONT PANEL AND SIDE PANELS WITH INNER CLIPS AND CONNECT
THE TOP OF FRONT PANEL AND SIDE PANELS WITH METAL BRACKET.
< 6 > INSTALL BACK PANEL AND SIDE PANELS WITH OUTSIDE BUCKLES AND
CONNECT THE FLOOR HEATER CABLE TO BACK PANEL AND COVER IT WITH
WOODEN COVER.
Before place the back panel to the bottom panel, pleases pull out the wire of the bottom heater and
thread it to the back panel. Then put the back panel onto the bottom panel and make sure its inner
side stands against the wooden beam on the bottom panel. Connect the back panel and side panel
with outside-buckles.
<
7
>
PLACING TOP PANEL
1. Gently place the top panel onto the rest of the assembled panels. When four corners are in place,
gently push down the top panel from the outside corners until it is snugly fit over the rest of
panels.
2. Make sure the cable does not get pinched between the panels.