Copyright © 2007, Infosystem Technology Corporation, Ltd.
32.
WM-112
Serial to Ethernet Module
WM-112
Serial to Ethernet Module
Parameter Description
Parameter Description
TCP Link Time Out
When this option is enabled, the TCP
communication will be disconnected by the
WM-112 converter if there is no further TCP
activity within the given timeout value.
Command Port
The WM-112 converter supports the command
mode, which user can use to setup the
parameters or get the information of the
converter with UDP protocol from the remote
host. The default Command Port number is
65535. The command port of the WM-112
converter should be set correctly while using
the command mode. Please refer to appendix
1 for further
