manualshive.com logo in svg

InfoSight INFOTAG KE28 Series, Operation And Maintenance Manual, Page: 18 / 34

Share
Download
InfoSight INFOTAG KE28 Series Operation And Maintenance Manual Download Page 18

Page 12

 

Copyright © 2016 InfoSight Corporation All Rights Reserved  

KE-28XX InfoTag

®

 Marker

 

 

   ╔══════════════[ InfoSight Corporation - InfoTag Marking System ]══════════════╗ 

   ║╔══════════════════════════════[ Tag Editor ]══════════════════════════════╗  ║ 

   ║║  ╔══════════════════════[ Operator Setup Editor ]═════════════════════╗  ║  ║ 

   ╠║  ║                                                                    ║  ║ ═╣ 

   ║║ 1║      Active   Prompt         Verify                   Auto Clear   ║  ║  ║ 

   ║║ 2║ 1 :   [X]    [HEAT # :   ]  [#######              ]      [X]       ║  ║ ╗║ 

   ║║ 3║ 2 :   [X]    [SEQ NUM:   ]  [##                   ]      [X]       ║  ║ ║║ 

   ║║ 4║ 3 :   [ ]    [           ]  [                     ]      [ ]       ║  ║ ║║ 

   ║║ 5║ 4 :   [ ]    [           ]  [                     ]      [ ]       ║  ║ ║║ 

   ║║ 6║ 5 :   [ ]    [           ]  [                     ]      [ ]       ║  ║ ║║ 

   ║║ 7║ 6 :   [ ]    [           ]  [                     ]      [ ]       ║  ║ ║║ 

   ║║ 8║ 7 :   [ ]    [           ]  [                     ]      [ ]       ║  ║ ║║ 

   ║║  ║ 8 :   [ ]    [           ]  [                     ]      [ ]       ║  ║ ║║ 

   ║║  ║                                                                    ║  ║ ║║ 

   ║║  ║ Qty Req [X]     [START NO:  ][X]     Lower [ ]     Upper [ ]       ║  ║ ║║ 

   ║║  ║                                                                    ║  ║ ║║ 

   ║║  ║        ╔══════════╗     ╔══════════╗      ╔══════════╗             ║  ║ ║║ 

   ║║  ║        ║    Ok    ║     ║ DEFAULT  ║      ║  Cancel  ║             ║  ║ ║║ 

   ║║  ║        ╚══════════╝     ╚══════════╝      ╚══════════╝             ║  ║ ╝║ 

   ║║║ ╚════════════════════════════════════════════════════════════════════╝  ║  ║ 

   ║║╚═                                                                        ║  ║ 

   ║╚══════════════════════════════════════════════════════════════════════════╝  ║ 

   ║                                                                              ║ 

   ╚══════════════════════════════════════════════════════════════════════════════╝ 

 

There are 8 available prompt fields.  The prompts in this example are explained below. 
 
The first line will print HEAT  # :  on the OPERATOR SCREEN and limit the operator to entering 
only 4 numbers. 
 
The second line will print SEQ NUM: on the OPERATOR SCREEN and limit the operator to 
entering only 2 numbers. 
 
Both will auto clear once the operator starts to type. 
  
The following describes each heading: 
 

ACTIVE - Toggle field (RETURN).  Makes prompt show up on OPERATOR SCREEN 

 

PROMPT - Up to a 10 character messages for each prompt. 

 

VERIFY - Verifies information typed is accurate using special characters: 

 

 

$ - Alpha Upper Case Characters (A,B,C,D...) 

 

 

# - Numeric Digits (1,2,3,4...) 

 

 

? - Any Character (A,B,C,1,2,3,?,/,%...) 

 

 

* - Any Character for any length up to the next instruction. 

 

 

[ ] -The Characters in the brackets are the only valid characters, exactly as typed. 

 

AUTO CLEAR - Clears the data field when the operator starts to type in the data. 

 

 

 

Also causes a clear after each cycle print completed 

 
At the bottom of the OPERATOR SETUP SCREEN has 3 prompts; OK, CANCEL, DEFAULTS.  
The following explains each: 
 

OK - Returns to the EDIT SCREEN and saves the operator input layouts. 

 

CANCEL - Returns to the EDIT SCREEN without saving the operator layouts. 

 

DEFAULTS - Restores the operator setups to the defaults. 

 
 
 

Summary of Contents for INFOTAG KE28 Series



































Reviews:

No comments