INFOSEC E4 LCD Pro 10 000, User Manual

Page: 40 / 64

39
INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr –
03 17 AA 59 204 10
This operation is used to check the battery status.
LCD display
Fault status
Description
When a fault occurs, the UPS will display fault messages on the LCD
panel.
LCD display
3-8. Fault Code
Fault Fault code Icon Fault Fault code Icon
DC Bus start failure 01 None
Inverter circuit output short
circuited
14
DC Bus over 02 None Negative power fault 1A None
DC Bus under 03 None Battery SCR short-circuited 21 None
DC Bus unbalance 04 None Inverter relay short-circuited 24 None
Inverter soft start failure 11 None Over temperature 41 None
High Inverter circuit voltage 12 None CPU communication failure 42 None
Low Inverter circuit voltage 13 None Overload 43
3-9. Warning Indicator:
icon flashing
Warning Icon (flashing) Alarm
Battery low Beeping every second
Overload Beeping twice every second
Battery unconnected Beeping every second
Over charge Beeping every second
EPO enable Beeping every second
Fan failure/Over temperature
Beeping every second
Charger failure
Beeping every second
I/P fuse broken Beeping every second