INFOSEC 10000 VA, User Manual

Page: 9 / 61

INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line
– Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 05 13 AA 59 206 14
9
To install in 6U, it’s not necessary to use short extensions.

Step 1

Step 2

Step 3
Assemble two feet and two
long extensions together.
Then, one set of plastic
supporter with 26cm width is
done.
Another set of
supporter could be
assembled in same way.
Align the two stands
approximately 35cm apart in
step 2.
Then, put UPS module and battery bank
in the stands as shown in step 3. Be
sure that the LCD of UPS should be on
upper half part of front panel.
And
assemble these metal plates and M4
screws as shown in step 4.
Install UPS module with ISO bank and one battery bank in 6U

Step 1

Step 2

Step 3
Assemble two feet and three
long extension -s with one
short extension as one tower
stand.
Align the two stands
approximately 35cm apart
Then, put UPS module, ISO bank and
battery bank in the stands. And assem -
ble these metal plates and M4 screws