INFOSEC UPS SYSTEM 4, rue de la Rigotière 44700 ORVAULT - France - www.infosec.fr
HotLine : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - [email protected] – 04 06 08 206 13
3
User’s instructions
The
PFS 6 GE
was designed to give the highest degree of protection against overloads and voltage peaks.
It protects your computer, peripherals and hi-fi equipment against damages caused by voltage peaks,
lighting and overloads. A resettle circuit breaker provides protection against overloads and short circuits.
Security
Please read all these instructions before installing the
PFS 6 GE
.
It must only be installed indoors in a protected location in which the temperature and humidity do not
exceed the limits specified in the technical specifications section.
Installation
Plug the
PFS 6 GE
into a two-pole connector with earth (2P+E–10 A). Plug your equipment to be protected
into the six protected outlets of the
PFS 6 GE
.
Put the mains switch into the “ON” position and check that it lights up. If it does not light on, check the
electrical power supply.
1. Mains switch with light
The mains two-pole switch of the
PFS 6 GE
switches the 6 protected outlets on and off.
This switch is red when the protection device is active and the outlets are powered.
2. Overload protection
When the consumption of connected equipment exceeds the authorized value, the circuit breaker opens to
protect the
PFS 6 GE
. To put it back into service, reduce the connected power and reset the circuit
breaker.
3. Protected outlets
Protected outlets are used to connect of equipment such as a PC, printer, monitor, scanner, CD ROM
external drives, hi-fi systems, VCR, home DVD player... The space-wide outlet is ideal to easily connect a
transformer block. They are controlled by the main switch.
In case of problem, do not disassemble the
PFS 6 GE
, there are no reparable parts inside it.
Call the After Sales Service.
