Safety Precautions
Safety Precautions
Read these instructions before you install, operate, or transport EonStor GSe Pro system.
Setup the EonStor GSe Pro system at a site where the ambient temperature stays lower than
40
C.
Install the power source socket outlet near the enclosure where it is easily accessible.
Secure airflow clearance around the enclosure:
- Secure an 18 to 20cm clearance around the enclosure.
- Do not cover the enclosure openings.
- Do not leave the drive bays empty as it will affect the airflow efficiency.
NEVER
remove more than one hard disk drive tray out of the enclosure at the same time!
Secure each hard disk drive using its retaining screws.
Put the power cords and other cables away from foot traffic. Do not place things over the
power cords and make sure they do not rest against data cables.
Ensure that the correct power range is being used before powering the device.
If the enclosure is not used for a long time, disconnect it from mains to avoid transient
over-voltage.
Important Notice
The use of Infortrend certified components is strongly recommended to ensure compatibility,
quality and normal operation with your Infortrend products. Please contact your distributor for a
list of Infortrend certified components (eg. SFP, SFP+, HBA card, iSCSI cable, FC cable,
memory module, etc.).
Summary of Contents for EonStor GSe Pro 2000 Series
