51
6.
Insert the new controller module
. Carefully push the controller until you feel
the contact resistance when the board edge connectors are engaging the
backplane. Push the ejection levers upward (indicated by the
blue arrows
) and
fasten the retention screw on the ejection levers.
7. Reattach all the cables.
8.
Power up the system
.
Check system message on the LCD screen, the
management software, or firmware menu-driven utility. When the replacement
controller is successfully brought online, the
on properly.
9.
Restoring NVRAM data.
To restore previous ID/LUN mapping settings, users
may use the following options:
Use
the “
Restore NVRAM from Disks
“or “
Restore NVRAM from
Files
” functions in the firmware. ID/LUN mapping will be restored.
