1-6
Chapter 1: Product introduction
WARNING!
The EonStor controller module is built of sensitive and non-replaceable components. When
replacing the controller module, you can only remove it from the enclosure when you already have the
replacement. Unnecessary tampering may damage the controller.
IMPORTANT!
The host boards are add-on components. Contact your local dealer for the compatible
host boards.
NOTES:
•
The Ethernet management port only supports 100 Mb and 1 Gb speeds.
•
For more information about BBU and flash backup module, see section
4.1.4 Replacing the CBM (Cache Backup Module) components
1.4
Rear panel components
This section describes the rear panel components of GSa 5000 Series systems.
1.4.1 Controller module interface
The I/O interfaces of the controller module allow you to connect to other devices and the LEDs allow you
to know the status of your controller.
Number
Part
11
Host boards (optional)
11
RJ-45 Ethernet management port
11
Controller status LEDs
11
USB 3.0 ports (for debugging)
11
Restore Default button
11
Restore Default LED
11
Mini USB port (console)
