2-6
Chapter 2: Hardware installation
2.2.3 Installing the host boards
When installing a host board to the board slots, you must follow the installation priority shown below:
Slot no.
1
2
3
4
5
6
7
8
Priority
3
4
5
7
6
8
1
2
NOTES:
• A downtime may occur when upgrading the controller/host board.
•
To add or replace a host board, the firmware automatically restores the default factory settings of
your system.
To install a host board:
1. Shut down your system and disconnect the cables from the ports on the rear panel.
2. Remove the front cover from the enclosure.
3. Push the controller release button to release the ejection handles.
Controller release button
Ejection handle
Ejection handle
