Infortrend Expansion Guide
Copyright © 2019 Infortrend Technology, Inc. All rights reserved.
Page 12 / 15
6. Installing the newly added drives
We recommend you to install the drives into the newly-added expansion enclosure after the enclosure is successfully
recognized by the storage system. After installing the drives to the enclosure, check the drives' status in the storage
management GUI. Once the drives appeared on the GUI, you can already use them in storage provisioning. For more details,
refer to the software manual.
IMPORTANT!
If SANWatch or Embedded RAIDWatch is used as a management tool for DS family, you must reload the mentioned
management tool after connecting the new expansion enclosure. If the management tool does not display the
newly-added enclosures, click
Data Reload
from the upper-right corner of the GUI to refresh the screen.
Figure 15: Data Reload button on Embedded RAIDWatch
