inform InfoSTS, Manual

Page: 32 / 47

-
31
-
STATUS MESSAGES
SERVICE LOGIN Service personnel is logged on from panel or RS232 for adjustment
EMERGENCY STOP External emergency stop signal is detected and the output shutdown
ON SOURCE 1 Load is on source 1
ON SOURCE 2 Load is on source 2
STS RESET STS is started (power on)
EMPTY LOG The current log record is empty
OUTPUT SHUTDOWN Output of the STS is shutdown currently
USER LOGIN User is logged on from panel or RS232 for adjustment
MANUAL TRANSFER Manual transfer is activated by the user
MAINT-BYPASS S1 Maintenance bypass switch is on S1 position
MAINT-BYPASS S2 Maintenance bypass switch is on S2 position
OUTPUT INHIBIT The output of the STS is shutdown
INPUT SOURCE ALARM DESCRIPTIONS
INPUT SOURCE VOLTAGE OUT OF TOLERANT
If the input source voltage is less then minimum adjusted value or higher then maximum adjusted value STS
decides the related source is BAD.
BLACKOUT SENSING
Programmable black out sense provides flexible operation according to conditions and applications.
TRANSFER FLOWCHART
figure - 14