IFC6410 User Guide
SYSTEM SETUP AND USAGE
001821 Rev C
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
9
Confidential and Proprietary
– Inforce Computing, Inc.
Provided under NDA
Figure 7: Connector Co-ordinates BOTTOM
3.2.4 STEPS TO BOOT IFC6410
1. Remove the IFC6410 board carefully from the anti-static bag
NOTE:
Handle with care, while plugging, to avoid physical damage.
2. Connect the display through HDMI/LVDS
3. Connect the power adaptor to the wall socket
NOTE:
Carefully connect the DC connector to the jack provided on the board
CAUTION
Use the DC adaptor provided by Inforce Computing.
Do not use the third party DC adaptor without our technical support, as it may damage your
board.
4. Switch on the wall socket the board boots up automatically.
After a few seconds, the "
android
" logo, followed by the
lock screen
will be displayed on the
screen as shown in the following
Figure 8
and
Figure 9