inforce IFC6410, User Manual, Page: 15 / 31

IFC6410 User Guide SYSTEM SETUP AND USAGE
001821 Rev C MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 6
Confidential and Proprietary
– Inforce Computing, Inc.
Provided under NDA
3 SYSTEM SETUP AND USAGE
3.1 HARDWARE SETUP
Set the proper boot configuration using the boot-selection switch on board.
Refer Boot Configuration section, for more details on various boot configuration settings.
Refer Figure 5 LED locations on board.
Refer Steps to Boot IFC6410 section, for booting.
3.2 HARDWARE OPERATION
3.2.1 BOOT CONFIGURATION
Boot Configuration can be done by selecting the switch (SW3) provided on the board.
CONFIG switch in
ON position indicates a level 0
Table 3: Boot selection
CONFIG_1
(Position-2)
CONFIG_0
(Position-1)
Function
0 0 EMERGENCY BOOT (SDC3 FOLLOWED BY USB HS)
0 1
SDC3 FOLLOWED BY SDC1 (eMMC)
1 0
SDC3 FOLLOWED BY SDC2 (Invalid)
1 1 SDC1 (eMMC) DEFAULT
Fast and secure boot selection
CONFIG_6
(Position-3)
Function
0
SECURITY BOOT
1
FAST BOOT
Figure 4: Boot Selection Switch
0 0 0
Config-0 (Pos1) Config-1 (Pos2) Config-6 (Pos3)
1 1 1