InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 76 / 128

76
Chapter 2
Configuring The LQ-1600K Emulation With Control Codes
Set Intercharacter (Two-Byte) Spacing In DBCS Mode
ASCII Code FS S
n1 n2
Hex Code 1C 53 n1 n2
Dec Code 28 83 n1 n2
Purpose Defines preceding/succeeding dots for intercharacter spacing.
Comment This control code defines the space to the left/right of the
printed character in dot positions. The dot size for
n1 and n2 is
equal to 180 dpi. The default for n1=0 and n2=3. This control
code does not function while in non-DBCS mode and only for
two-byte characters in DBCS mode.
Set International Character Set
ASCII Code ESC R
n
Hex Code 1B 52 n
Dec Code 27 82 n
Purpose Specifies a language overlay that prints the characters shown
in Table 9 when the specified code is invoked.
Where:
n = hex 0 through E to determine the language overlay shown
in Table 9.
The real Epson only defines character sets through hex C.