InfoPrint LQ-1600K, Programmer'S Reference Manual

Page: 12 / 128

12
Chapter 2
LQ-1600K Emulation
Default Values And States
Your printer stores a set of typical operating states and conditions in the flash
memory. The first time you power up the printer, the factory settings in Table
1 are automatically invoked.
Table 1. Factory Settings for Hanzi GB
Characteristic Default Setting
Select CPI 10.0
Select LPI 6.0
DBCS CPI 6.7
Host Command Ignore Unidir.
Typeface Near LQ
Styling Type SONG
High Density Disable
Proportional Spacing Disable
Bold Print Disable
Italic Print Disable
Slashed Zero Disable
Text Position Bottom of Line
DBCS/ASCII Mode DBCS Mode
DBCS ASCII Style Normal
Compressed Mode Disable
DBCS Compressed Disable
Encoding Address Table
Taller 15 CPI Disable
Graphics Spd Up Normal
Left Margin 0 columns
Right Margin 0 columns
Bottom Margin 0 lines
Perforation Skip Disable
Form Length 11.0 inches
279.4 millimeters
66 lines
Form Width 13.6 inches
345.4 millimeters
136 characters
Reset Cmd CFG Ld Disable
Illegal Code Pt. Normal
Define CR Code CR = CR