The Product Unpacking and Installation
After the product extraction out of the package it is
necessary to handle it with care, do not drop, shake
it and afford other influence. The product is designed
for horizontal allocation onto flat surface.
Do not place the product onto slippery surface, in
place where it may be exposed to vibration or hazard
to drop and other possible risks to the product to be
damaged which may cause invalidation the product
guarantee.
Do not dispose the product onto soft surface like on
the carpet, bed, etc., for such surfaces cease access to
the ventilation openings and complicate air flow that
may cause the product overheating and invalidate
guarantee in result.
Do not locate the product into the furniture in case
of vacant clearance around the product is not pro-
vided for the sufficient product ventilation.
Do not place the product in place where it may be
exposed to influence of direct sunlight, next to the
sources of open fire and convectors.
Do not dispose the product on surfaces which in
operating process may get warm, for instance, video
record player or intensifier and do not put anything
on the top of the shell as well. Do not cover the prod-
uct with anything.
Containing liquids objects, such as vase, plant pot
are not to be placed next to or on the product. Do
not touch or move the product during its operation.
Switch off the product if you need to shift it.
The product is intended for use indoors.
The power supply cord is to be put to prevent its
deformation and jamming and touching it well. The
power supply cord is not to be laid under the carpets
or blocked with anything where any damage may
not be noticed.
Power supply unit
The product should be used with power supply unit
provided by the manufacturer only.
The power supply unit is fitted out with plug which
is intended for connecting to socket in your country
usage. In case of the necessity in the product
connecting in other country or in the region with
other data of electric circuit the power supply unit
adopted for use in the specified area should be
received from the manufacturer.
Operation
The outer power supply unit of the product is
getting warm in operation. In case of outer power
supply unit gets hot, switch off promptly and
get in touch with the equipment supplier for its
replacement.
