September 28, 2016
INFODRAW R&D PMRS/TMRS-201 User Manual v6.0.0.2
151
The PMRS system supports PTZ control. The user can control the Pan/Tilt/Zoom of the PTZ
camera according to its ability. The PMRS system supports PTZ cameras using PELCO D and
Visca Protocol. Follow these instructions to setup PTZ control:
1)
Turn the PMRS device OFF.
2)
Remove any SIM card from the PMRS device.
3)
Ensure the 2 left dip switches on the PMRS unit (numbers 1,2 are in up position).
4)
Attach a USB cable to the device and open the “MRS Device Configurator”.
5)
Turn the unit on.
6)
In the Device Configurator, Open the “PTZ” tab menu.
7)
Click the “Add” button to add the “Video Channel” and “Camera ID”. As the PMRS
unit only has one video channel, set the “Video Channel” and “Camera ID” both to 1.
8)
Set the PTZ Baud Rate from the “Baud Rate” list box. The system supports the
following Baud Rates: 1200/ 1800/ 2400/ 4800/ 9600/ 19200/ 38400/ 57600/
115200/ 230400.
9)
Save the configuration to the device by selecting File>Write To Device.
10)
After you see the message “Parameters saved” at the bottom of the screen, select
File>Shutdown Device.
11)
After you see the message “Device disconnected” at the bottom of the screen, turn
the PMRS device OFF, unplug the USB cable and flip the 2 left dip switches on the
PMRS unit (numbers 1,2 ) to down position.
12)
Insert the SIM card. Ensure the GSM/GPS Antennas are connected to the unit.