September 28, 2016
INFODRAW R&D PMRS/TMRS-201 User Manual v6.0.0.2
145
1)
You can now unplug the USB cable from the PC and the device.
2)
Turn the PMRS device off.
3)
Push down the 2 dip switches.
4)
Insert the SIM card into the PMRS unit.
5)
Ensure the GSM/GPS Antennas are connected to the unit.
After inputting the above settings, the
configuration must be saved into the
unit. This is done by
opening the File
menu and clicking “Write To Device”
(The candle icon).
After pressing “Write to
Device”, the status at the
bottom left hand side of the
application will show:
“Parameters Saved”.
After the parameters are
saved, open the “File” menu
and select “Shutdown Device”.
You will then see the following
status at the bottom left-hand
side of the screen: “Device
disconnected”.