background image

1

INTRODUCTION

The In Focus LP 740™ is a multimedia projector that packs SXGA 
graphics (1280x1024) with 16.7 million colors. It generates crisp, 
clear images using a new and innovative reflective technology. 
The LP 740 is ideal for high-performance business, engineering 
and imaging applications that demand exceptional resolution 
and color quality.

NOTE: You can resize your 

640x480, 800x600, or 

1024x768 images to 1280x1024 

by pressing the Resize button on 

the keypad or remote.

Image Resolution

The SXGA resolution of the 740’s projected image is 1280x1024. If 
your computer’s screen resolution is higher than 1280x1024, reset 
it to a lower resolution before you connect the 740.

Compatibility

The projector is compatible with a wide variety of computers and 
video devices, including:

IBM, SUN, SGI, and selected HP and DEC workstations, up to 
1280x1024 resolution.

IBM-compatible computers, including laptops, up to 1280x1024 
resolution.

Apple Macintosh and PowerBook computers up to 1280x1024 
resolution.

Most standard VCRs, camcorders and laser disc players.

Unpacking the Projector

The projector comes with the items shown in Figure 1. Check to 
make sure all are included. 

Contact your In Focus dealer imme-

diately if anything is missing.

If you are experienced in setting up presentation systems, use the 
LP 740 Quick Start

 card that was included in the shipping box. For 

complete details on connecting and operating the projector, refer 
to this User’s Guide. User’s Guides are also available for down-
load from our website at www.infocus.com.

Summary of Contents for LP 740 LiteMount



















































Reviews: