InFocus LP 70+, User Manual

Page: 19 / 67

5
SETTING UP THE PROJECTOR
1
Place the projector on a flat surface.
•
The projector must be within 6 feet (1.8 m) of your power
source and your computer.
•
If you want to project from behind a translucent screen, set
up the projector behind your screen. See “Rear” on page 24
to reverse the image.
2
Position the projector the desired distance from the screen.
NOTE: The projector must be at
least 4.9 feet (1.5 m) from the
projection screen.
•
If the image is too big or too small, use the zoom ring to
adjust the size or move the projector forward or backward.
Figure 5 shows three projected image sizes. For more infor-
mation about image size, see “Projected Image Size” on
page 38.
F
IGURE
5
Projected image size
3
Make sure the projector and the computer are turned off.
3.
3
ft.
/1
m
22
.2
ft
./
6.
7
ft/
4.9 ft./
9.9 ft./
33 ft./
10m
6.
8m
2m
3m
1.5m
LP70.book Page 5 Friday, February 13, 2004 7:39 AM