OPS On/Off
• If the product is installed with the OPS module and it is in OPS signal source, the OPS module will start
automatically. If not, start it manually.
• Before turning off the product, first use the touch function or mouse to turn off the OPS module from the
Start menu. The Standby key on the panel or remote control can be used to turn off the product only after
the OPS module completely shuts down. It is not allowed to press the Standby key or directly disconnect
the power supply without turning off the OPS module as it will damage the OPS module.
• When the OPS module enters the OFF state and no operation is performed on the PC for a long period of
time, this product will enter standby. To use the module, just restart the product.
• Note: The OPS module is optional.
Sidebar Setting
Press the sidebar shortcut key arrow, or slide from the edge of the screen inwards(when feature activated in
main menu settings) to open the sidebar menu to show system setting, signal source/menu setting, small tools,
progress management, switch to Android homepage, return and help.
Signal Source Switching
You can use the remote control or touch function to switch the source by the following
methods:
Method one:
• Press the "Signal Source" key on the remote controller to call "Signal Source Menu
• Press the cursor key on the remote control to select a signal source
• Press the"OK" key, and then the product will switch to the input signal source that you selected.
Method two:
• Selected the side bar menu > Signal Source Settings,
• Select signal source and then the product will switch to the input signal source you selected
Remark: the picture is for reference only, subject to the actual signal source menu.
