—
32
—
Advanced 1 Features
Press the
Menu
button to open the
OSD
menu. Press the
◄► buttons to move to the
Settings 2
menu. Press the
▲▼ buttons to move to the
Advanced 1
menu and then press
(Enter)
or ►.
Press the
▲▼ buttons to move up and down in the
Advanced 1
menu. Press the
◄► buttons to
enter and change setting values.
I
TEM
D
ESCRIPTION
Menu Position
Press the
◄► buttons to enter and select different OSD location.
Translucent Menu
Press the
◄► buttons to enter and select OSD background translucent level.
Low Power Mode
Press the
◄► buttons to enter and turn Low Power Mode Off, On, On by Lan.
Fan Speed
Press the ◄► buttons to enter and toggle between Normal and High fan speeds.
Note
: We recommend selecting high speed in high temperatures, high humidity, or
high altitude (higher than 1500m/4921ft) areas.
Lamp Hour Reset
After replacing the lamp, the lamp should be reset. See page
33
for more information
on
Lamp Hour Reset
.
Projector ID
Press the
◄► buttons to enter and adjust the two digit projector ID from 00 through
98.
Network
Press
(Enter) or
► to enter the Network menu. See page
33
for more information
on
Network
.
Note:
When "
On by Lan
" is enabled, VGA Out is inactive when the projector is in standby mode.