User’s Manual
Installation II Menu
Press the
MENU
button to open the
OSD
menu. Press the cursor
◄►
button to move to the
Installa-
tion II
menu. Press the cursor
▲▼
button to move up and down in the Installation II menu.
I
TEM
D
ESCRIPTION
Auto Source
Press the cursor
◄►
button to enable or disable automatic source detection.
Auto Power Off
(min.)
Press the cursor
◄►
button to enable or disable automatic shutdown of lamp when
no signal.
Press the cursor
◄►
button to enable or disable Automatic Power On when AC power is
supplied.
Auto Power On
Press the cursor
◄►
button to toggle between Normal and High fan speeds.
Note
: We recommend selecting high speed in high temperatures, high altitude areas.
26~30°C
( 78.8~86
°F )
31~35°C
( 87.8~95°F )
≦
25°C
( 77°F )
0~4,999ft
( 0~1523m )
Normal Mode
Fan Speed
5,000 ft
( 1524m )
Normal Mode
High Speed Mode
7,500 ft
( 2286m )
High Speed Mode
----------
10,000 ft
( 3048m )
High Speed Mode
--------------------
Press the cursor
◄►
button to select the lamp mode for higher brightness (Normal) or
lower brightness (Eco) to save lamp life.
Lamp Mode
Press
(Enter) /
►
to enter the Advanced menu. See
Advanced Features
on page
Advanced
29.
Factory Reset
Press
(Enter) /
►
to reset all OSD settings to factory default settings.
Press
(Enter) /
►
to enter the Status menu. See page 31 for more information on
Status
Status
.
– 28 –