Radio Test Mode
The device contains a radio test mode to facilitate RF testing. Normally the Reader will scan for 10
seconds and then turn off the radio. If radio test mode is enabled the Reader will scan until the battery
fails.
To turn on radio test mode follow these steps:
- Enter the menu by holding down the button for 5 seconds
- Enter the advanced menu by holding down the button for 8 seconds
- Press the button 5 times to get to the radio test mode option:
Radio Turn OFF
Hold to change
- Hold the button down for 2 seconds to turn radio test mode ON
Radio Stay ON
Hold to change
- Now exit the menu by either:
- waiting 30 seconds and the unit will exit the menu by itself
- Press the button 1 more time to get to the End of menu screen. Hold down the button for 2
seconds to exit menu.
Now that radio test mode is enabled, pressing the button to start scanning will scan until the battery
fails. After exiting the menu press the button.
Scanning...
Specifications
The unit is designed to operate over the temperature range of -20 to +60 degrees Celsius.
Warnings
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Copyright 2011 INFOCHIP
Page 3 of 4
Rev 03
