INFOBIT AV
www.infobitav.com
⑦
Enter the button. Enter the function adjustment of the input interface.
⑧
Parametric equalization button. Enter the parameter equalization adjustment interface and
select the channel to be adjusted.5 segment equalization: center frequency, gain, bandwidth,
all channels, reset
⑨
Compressor button. Enter the compressor adjustment interface, select the channel to be
adjusted, and adjust with the functions of threshold, ratio, startup time, recovery time, pass-
through, reset, etc.
⑩
Mixer button. Enter the mixer adjustment interface to realize 8 in 8 out matrix mixing.
⑪
Diagram shows the equalization button. Enter the equalization adjustment interface shown
in the figure, select the channel to be adjusted, and equalization adjustment of 31 segments:
narrow band, normal, wide band, frequency, gain, flatness, straight through.
⑫
Limiter button. Enter the limiter adjustment interface, select the channel to be adjusted,
and adjust with the functions of threshold, recovery time, straight through, reset, etc.
⑬
Output button. Enter the function adjustment of the output interface.
⑭
Connect button. Enter the device login interface.
⑮
Set button. Enter the setting interface, PC software download, upgrade, global reset and
other functions.
FAQ
1. Power indicator light out?
A: When using adapter power, check that the adapter is connected properly
B: When using PoE, check whether the switch supports 802.3af.
C: If the device is damaged, please contact the after-sales service
2. Audio input fault?
A: Check if the routing of the Dante Controller is correct
B: Check whether the input is a valid audio source
C: Check whether the phantom power supply of capacitive pickup device is turned on.
D: Check if the input channel gain is too small.
3.Audio output fault?
A: Check whether the output device is working properly.
B: Check if the routing of the Dante Controller is correct
C. Check if the output channel gain is too small.
Specification
Simulated maximum gain
-6~36dB
±0.2dB (20~20kHz)
+10dBu, balanced
Maximum output level
+14dBu, balanced
48K
