INFOBIT AV
www.infobitav.com
①
12V Dc power interface.
②
OLED Display screen, used to display IP address and other information.
③
Two-way Dante network interface, support PoE power supply, support network cascading.
④
Signal indicators, showing the status of 1-4 input signals.
⑤
Four-way balance signal input interface, if linear input, please connect "+" and "G".
⑥
Signal indicators, showing the status of 1-4 output signals.
⑦
Four-way balance signal output interface
⑧
Two-way AM100 interface, support far field pickup
⑨
The flashing light indicates that the system is in normal operation
⑩
When the indicator lights up, the system power is switched on.
Use and operation steps
1) Please connect according to the prompts in the interface instructions. The device supports
12V DC and PoE power supply.
First Way: Prepare the POE switch and network cable, when the POE switch is normally
powered on, connect the "Dante & POE" interface and the POE switch and check if the power
indicator on the panel is on.
Wait about 3 seconds, and the device screen displays the device IP address information.
