DC 24V
Plug the DC 24V power supply into the unit and connect
the adaptor to an AC outlet. (
Note:
The transmitter can
power the receiver via a CAT cable.)
5.2 HDBaseT Receiver
-5-
HDBT IN
Connect to the HDBT OUTPUT port on the transmitter
with a CAT cable.
HDMI OUT
HDMI output port, connect to HDMI display device such
as TV or Projector with an HDMI cable.
No.
Name
Function Description
1
2
3
Power Indicator
When the receiver is powered on, the power indicator will
be on.
4
SERVICE port Used for firmware update.
IR IN
Connect to the IR Receiver cable. The IR signal will send
to the IR OUT port of the transmitter.
5
6
7
DC 24V
Plug DC 24V/1A power supply into the unit and connect
the adapter to an AC outlet.
(
Note:
The HDBaseT receiver also can be powered by the
transmitter via a CAT cable.)
11
SERVICE
IR IN
IR OUT
HDMI OUT
DC 24V
HDBT
IN
AUDIO OUT
1
2
3
8
4
9
5
6
7
AUDIO OUT
Audio output port, connect to amplifer or speaker.
IR OUT
Connect to the IR blaster cable, the IR signal is from IR
IN port of the transmitter.
8
9
RS-232
3-pin Phoenix connector for RS-232 command
transmission. The RS-232 command will pass-through
from transmitter to receiver or from receiver to transmitter.