6/22
8
BODY button
Used to switch Wireless Miracast. When the button
is pressed, the button light will be on, and the
device will switch to Wireless Miracast output.
9
PIP button
Used to switch 3 channels of signal source output
PIP mode: single-screen, dual-screen, and three-
screen displays. Press and hold the button for 5s,
OSD will display the IP address, Subnet Mask and
Gateway information.
10
USER 1/2 button
User-defined function button. User can define the
two buttons’ functions through Web setting, please
refer to “System Control Configuration” for details.
11
Power button
When the system is on standby, short press the
button to start the system. At this time, the button
light flashes red and green for a while, then turns
to green after the system is started. When the
system is working normally, long press 3 seconds
to enter standby mode.
12
HDMI 1/HDMI 2
/VGA button
Used to switch HDMI 1/HDMI 2/VGA input signal,
and the selected button will illuminate green.
13
Freeze button
Press the button to freeze the display screen, the
button will illuminate green. If the input channel
changes, the freeze function will be canceled
automatically. This function is only valid for HDMI1,
HDMI2 and VGA input signals at the desktop plate
end, but not for the cascade input DVI signals.
14
AC POWER port 100~240V AC power output port.