9/22
No.
Name
Function Description
1
Power LED
Red LED will be on when the unit is powered on.
2
STATUS LED
Used to indicate the status of IR learning:
LED is flashing: IR is learning;
LED is always on: IR learning is successful;
LED is off: IR learning has failed.
For IR learning, please refer to the WEB control
interface description.
3
USB DEVICE
Used to connect USB devices such as mouse,
keyboard or USB camera.
4
LAN
Used to connect router, switch or devices that
require Ethernet functionality .
5
IR IN
IR input port for IR learning.
6
IR OUT
Used to control devices controlled by IR such as
TV set, set-top box or air conditioner.
7
RS-232
Serial port control port. Used to control projector,
TV or other controlled devices.
8
RELAY port
Relay output control port. Used to control screen,
light, curtain or other controlled devices.
9
DC 24V
DC 24V power input port.
10
HDBaseT IN
HDBaseT signal input port, connect the HDBaseT
output port of the Transceiver via a CAT6 cable.
11
HDMI OUTPUT HDMI output port, connect to HDMI display device.
12
AUDIO OUTPUT
Analog audio output port, connect to the amplifier
via an audio cable.
13
SERVICE port
Used to upgrade the module software of Wireless
Miracast.
14
WIFI antenna
WIFI antenna for Wireless Miracast connection.
Note:
As for the detailed description of IR IN, IR OUT, RS-232 and RELAY port,
please refer to the “Control Page” of Web GUI for details.