All rights reserved and shall not be copied and distributed in any form without written permission.
Room 301, Building C3
Hefei National High-tech Industry Development District
China, Anhui, Hefei
，
230012
+86-551-62839826
11
Figure 5-6. Reticle calibration interface Figure 5-7. Compass calibration interface
5.5 Remote Control
With adapted Blue Booth remote controller or App in smart phone, you can remote control Xmini
via Blue Booth, as following steps:
1.
Turn On Blue Tooth in Xmini, the icon of Blue Booth blinks;
2.
Turn on the Blue Booth remote controller (or App) within ONE minute to connect with Xmini
automatically. HOLD DOWN the power button of remote controller for 15 to 30 seconds. Once
connected, the icon of Blue Tooth appears on the screen without blinking. If disconnected more
than ONE minute, the device will turn off Blue Booth and icon of Blue Tooth turn into grey.
3.
When remote controller or Smart phone with App was far away from connecting distance or
turned off, the Xmini will turn off Blue Tooth in 30 secs automatically.
6.
Preventative Maintenance
6.1 Battery Replacement
▶
It is necessary to power off before replacing the batteries;
▶
The battery power icon is displayed on the upper right side of the interface and there are four
levels of power.
▶
When the battery icon turns to red, it means that the power is less than 25% and please
