V1.0.1 - 13 -
Yantai IRay Technology Co., Ltd.
11th Guiyang Street, YEDA
Yantai 264006, P. R. China
Unfocused
Aim at the target position for auto focus
calibration
6 Maintenance
6.1 Attention
⚫
Make sure the camera is fixed firmly when the camera is installed on wall,
ceiling or pillar.
⚫
The camera shall not fall on the equipment, especially vigorous vibration
equipment. Keep the camera away from the presence of magnetic field
interference, avoid mounting camera to the surface where occurs vibration or
shocks easily. (The camera may be damaged ignoring this item).
⚫
The camera lens shall not be aimed at the high temperature target such as sun,
incandescent light etc., or it may damage the lens or detector.
⚫
Equipment used indoors should not be installed exposed to rain or very wet
areas.
⚫
Do not place the equipment in an environment with corrosive gas, which may
cause damage to the equipment.
⚫
Avoid placing equipment in the area where has direct sunlight, poor
ventilation, or near heat sources such as heaters (ignoring this can lead to fire
hazards).
⚫
Please keep all original packing materials of the equipment properly, so that in
case of any problem, use packing materials to pack the equipment and send it
to the agent or return it to the manufacturer for treatment. IRay shall not be
responsible for any accidental damage in transit caused by materials other than
the original packaging.
6.2 Cleaning and Maintenance
⚫
Do not use cleaning products that corrode or scratch optical glass components.
