AT31F/AT61F Online Temperature Measurement Thermal Camera User Manual
8
9.Quick Start Guide
Please follow the steps:
1.Install IRT_VMS if the thermal camera is with other networking equipments, and
IRT_TAS_AT can be installed on a single thermal camera for temperature
measurement and analysis. The software may have version updates. Please refer to
the actual version. It is recommended that the computer configuration for installing
the software meet the following conditions:
1.) i5-9500T and above CPU
2. )8G and above memory
3. )64-bit Win10 system,
4.) M
ain
board H370 chip set
5.) Support Gigabit network.
6. )The screen resolution is recommended to be 1920
×
1080
7.) Video Memory 128MB
8.) Network card RTL8168/8111/8112 Gigabit Ethernet Controller
2.Connect the thermal camera, power supply and computer.
3.Set the computer configurations according to the software instructions for
IRT_VMS_User Manual or IRT_TAS_AT_User Manual, change the IP to 192.168.1.
×××
.(Do not choose 123 or 29 to avoid connection failure for the same IP with the
camera.
4.Double-click the client icon, enter the correct user name and password, and click
login to start the client.
5.Select the IP on the client homepage, and add the module number you want to
preview to the PC preview interface. If the thermal camera is successfully connected,
you can start imaging and monitoring with the thermal camera.
6.The 232 transmission between the computer and the thermal camera can be
realized through the RS232 interface on the cable.
