iNFinuvo CleanMate 365 QQ-2L, User Manual

Page: 6 / 12

CleanMate 365 CleanMate 365 CleanMate 365 CleanMate 365
CleanMate 365 CleanMate 365
1. Make sure that the power of the unit is turned 'OFF'.
2.Use your fingers to depress the tabs at the front of the battery cover. Lift
up the battery cover by these tabs as shown in Illustration 1.
3.Make sure the battery is inserted in the correct orientation by aligning the
silver strips on the Battery with the metal tabs on the inside of the battery
compartment. See Illustration 2.
4.Close the battery cover by first inserting the tabs into the slots at the
back of the unit, and then pressing down on the front side of the battery
cover until the plastic tabs click in place. Please see Illustration 3.
1
2
Illustration 1
Illustration 2
Illustration 3
Clean Mate 365
QQ-1
Clean Mate 365
QQ-1
Self - Charging Base Self - Charging Base CleanMate 365 CleanMate 365
The battery needs around 3.5 hours to be fully charged.
1. POWER Indicator (Blue LED light): This light is
on when the Self-Charging
Base is powered on.
2. GO Indicator (Green LED light):
A.If you want the QQ-2L to perform cleaning again after being fully charged,
press “GO” button once. Make sure the “GO” light in
on to confirm your
setting.
B.After the QQ-2L is completely charged, you will hear 3 beeping and one
long beep sounds, and the QQ-2L will automatically leave the Self-Charging
Base to do the cleaning.
Remote Control Function Remote Control Function
Battery Installation and Removal Battery Installation and Removal
Battery Installation and Removal Battery Installation and Removal
8
Note: the docking station
must be placed against the wall. Note: the docking station
must be placed against the wall.
"
Go”button
"
Go”button
Power Power
“Go” LED indicator “Go” LED indicator
Power on LED Power on LED
Self charge base panel Self charge base panel
WALL S OCKET
Illustration 1 Illustration 1
9
8. Home button: Use this Button to make QQ-2L go back to the charging
base.
9. Power off Button: to power Off QQ-2L manually by pressing Power Off
button. Note: QQ-2L Power-on button is on the main unit
.