15
Press the top button of the applicator, and the
sensor electrode have been inserted automatically;
Gently pull applicator up until you see adhesive
patch.
Ensure the tape firmly bonded.
Run your fingers around the adhesive.
Slide transmitter tab into the slot at the end of the
holder.
Press the other end of the transmitter until it clicks
into the holder, you will heard 2-clicks sound.
If the transmitter isn’t embedded properly
，
it may
cause the transmitter to break away.
Warning
The sensors
（
Model No. SP3-WL-03
）
and transmitters
（
Model No.
TP3-WL-03
）
of the Continuous Glucose Monitoring Systems
（
p3
）
should be
suitable for each other. The products of different generations cannot be
connected to each other and thus cannot work. Make sure that the system uses
