21
After update successfully, it needs to reboot the system. There is time prompt in
the web page during reboot. After reboot, it will skip to new web page to run
new program.
Note:
Available only for the super user.
Factory Settings
V6202IR-H02 series camera provides online reset function, which greatly
facilitates reset adjustment.
Select
“Keep current IP unchanged”, click “Reset” button and the system will
pop up a message as below:
Figure 4-9
Click “OK”, all the parameters (excluding IP address) will be reset to the
factory default settings.
If “Keep current IP unchanged” is unselected, the IP address will be reset to the
factory default settings.
There is time prompt in the web page during reset. After reset, it will skip to
new web page.
If current IP unchanged, you can access web page directly. If IP address resets
to 192.168.1.100, you can’t access web page. Then, you have to set PC’s IP address
to 192.168.1 section, such as 192.168.1.25. After that, access web page
to change
camera’s IP address and save, PC’s IP address will restore to the corresponding
section.
Note:
1.
To avoid error happens, the operation of online reset function should be
performed under qualified personnel’s guide.
