8
CHAPTER II INSTALLATION
2.1 Installation Precautions
Do not drop the camera or subject it to strong knock.
Do not point the camera lens toward the sun or other strong light.
Do not install the camera in places with high humidity, frequent vibrations,
and possible shocks. For version without heaters, do not install the camera
in environment with temperature beyond the acceptable range (from -20°C
to 60°C), while, for version with heaters, do not install the camera in
environment with temperature beyond the acceptable range (from -40°C to
60°C).
Make sure to choose the suitable position that can support the weight of the
camera and the bracket in years and fix them properly.
Exercise maximum caution when installing the unit to the wall or ceiling.
You should not engage in the installation work yourself. Ask a professional
to do the job, since the fall of the unit can result in injuries and accidents.
As a failsafe against falling, attach the unit by chain, wire cable or other
safety restraint to an appropriate anchor point.
Open the back panel to insert TF card should be performed in a dry
environment. To prevent the camera module moistened and dusted, cover
with the back panel quickly after TF card is installed.
Do not open the front panel to adjust the built-in fixed lens.
2.2 Installation Introduction
There are two camera-mounting holes at the bottom of the camera.
See the figure below: (Unit: mm)
